Magma PCIe Expansion System EB2R Manuel d'utilisateur télécharger pdf (Page 30)

MAGMA

RedHat 9 Linux

Once the EB2 has been installed in a RedHat9-based system, its

installation can be verified by typing the following command lines:

lspci –t Displays the overall structure of the PCIe expansion system

lspci –vv Lists additional information about the PCIe switch (in our

case it will list the Integrated Device Technology (IDT) information.

Ispci –vvv Displays the most comprehensive information about the

expansion system.

Below we’ve shown the output corresponding to the lscpi command:

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory

Controller Hub (rev 02)

00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI

Express Root Port (rev 02)

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High

Definition Audio Controller (rev 01)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI

Express Port 1 (rev 01)

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI

Express Port 3 (rev 01)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family)

USB UHCI #1 (rev 01)

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family)

USB UHCI #2 (rev 01)

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family)

USB UHCI #3 (rev 01)

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family)

USB UHCI #4 (rev 01)

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family)

USB2 EHCI Controller (rev 01)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

Pas de commentaire

Magma PCIe Expansion System EB2R Manuel d'utilisateur Page 30