Magma PCIHIF68 Guide d'installation télécharger pdf (Page 15)

MAGMA

Chapter 3 Verify Installation 7

To see if your installation is completed:

 Click on the ‘+’ sign to the left of the ACPI (BIOS) to open it.

This is typically found at the top of the Device Manager

Window.

 Click on the ‘+’ sign to the left of the PCI Bus to see all PCI

Bus connections.

 Click the ‘+’ sign to the left of the line containing the words “PCI

Bridge” or something similar. You should now see the PCI

Standard PCI-to-PCI bridge immediately below it.

When installed correctly, you will see two “PCI to PCI Bridges” below

your system’s PCI Controller.

If your Magma expansion system uses a 13 Slot backplane, the Device

Manager will display three bridges instead of two as shown above.

If everything is OK, then the MAGMA PCI Host Card installation is

complete. You can now proceed to the

Expansion Chassis User Guide

for help with the installation of 3

Party PCI Cards.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Magma PCIHIF68 Guide d'installation Page 15