Magma PEHIFX1 Guide de l'utilisateur télécharger pdf (Page 16)

MAGMA

8 Chapter 3 Verify Installation

CHAPTER 3 Verify Installation

The Magma Host Card is not visible to the Windows’ Device Manager or

the Apple System Profiler until the Expansion System has been

successfully connected and properly powered on. Therefore, you will

need to connect your Expansion System to the host computer and turn

them both on before you can verify the Magma Expansion Chassis

installation. Always power-up your Expansion System by turning on the

power to the Expansion Chassis first, followed by your host computer.

Windows

To verify a successful installation on Windows, find the ‘My Computer’

icon and “right-click” on it. Then select ‘Manage’ from the pop-up menu.

Next, click on ‘Device Manager’ in the leftmost Computer Management

window. Finally, click on the View Menu and select View Devices by

Connection.

Open ACPI (BIOS)  Open PCI Bus Click the ‘+’ sign several times

until your reach a PCI or PCI Express Root Port with a PCI Standard

PCI-to-PCI Bridge beneath it.

When installed correctly, you will see three “PCI to PCI Bridges” below

your system’s PCIe Controller. Any 3

Party PCI cards installed in the

chassis will appear below one of the PCI-to-PCI bridges.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 44 45

Pas de commentaire

Magma PEHIFX1 Guide de l'utilisateur Page 16