Magma PCI Expansion System Spécifications télécharger pdf (Page 15)

MAGMA

6 Chapter 2 Hardware Installation

Applying Power Correctly

Starting Up:

You must apply power to the Magma expansion chassis BEFORE you

power up your computer. This will allow the higher numbered PCI buses

in the PCI bus hierarchy to be at a stable state when the host system

issues its master power-on bus reset. In systems that perform automatic

PCI bus configuration, this will allow the configuration code to recognize

the PCI bus hierarchy and any attached devices.

There is an On/Off switch on the back of the expansion chassis, as well

as an LED indicator to indicate power status. Verify that the green

power indicator is ON.

STOP

DO NOT TURN ON THE MAGMA EXPANSION CHASSIS UNTIL

YOU HAVE SHUT DOWN YOUR LAPTOP COMPLETELY! It can

cause a system lockup and loss of any unsaved data.

Shutting Down:

When shutting your system down, it is recommended that you first shut

down the computer correctly, and then power down the Magma

expansion chassis to avoid ‘computer lock-up’ and potential data loss.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Pas de commentaire

Magma PCI Expansion System Spécifications Page 15