Magma P7R464 Spécifications télécharger pdf (Page 25)

Chapter 3: Digidesign Expansion|HD Chassis 19

4 Connect all Pro Tools cards with TDM FlexCa-

bles. See “Connecting Pro Tools|HD Cards” on

page 6.

After connecting cards with FlexCables, connect

audio interfaces. See “Connecting Audio Inter-

faces” on page 7. After connecting audio inter-

faces, return here and complete the Digidesign

Expansion|HD installation process.

Example

The table shows one possible configuration of

cards (and audio interface connections), using

all slots in the Digidesign Expansion|HD.

Connecting the Chassis to the

Computer

To connect the chassis to the computer:

1 Connect one end of the Expansion|HD cable

to the Expansion|HD cable port on the chassis.

Connect the cable securely (you should feel it

click into place).

2 Attach the other end of the cable to the port

on the host card in the computer. Connect the

cable securely (you should feel it click into

place).

Chassis cards with multiple audio interfaces

Slot Card

Slot 1 HD Core (Interface #1 and #2)

Slot 2 HD Accel (Interface #3 and #4)

Slot 3 HD Accel (Interface #5 and #6)

Slot 4 HD Accel (Interface #7 and #8)

Slot 5* HD Accel (or Process)

(Interface #9 and #10)

Slot 6* HD Accel (or Process)

* Card only available at 44.1 kHz, 48 kHz,

88.2 kHz, and 96 kHz

If your system includes both HD Accel and

HD Process cards, always group like cards

together in the order outlined above (keep all

HD Accel cards next to each other, and any

HD Process cards next to each other).

For more information on using multiple au-

dio interfaces, see “Number of I/O Channels

in Expanded Systems” on page 11.

Expansion|HD back panel

The only active port on the chassis is the

Expansion|HD cable port. Do not connect

video devices, iLoks, or other peripherals to

any of the other ports on the Expansion|HD

chassis.

Expansion|HD cable port

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Commentaires sur ces manuels

Pas de commentaire